By inserting the wedges, the remaining height differences between two adjacent tiles are entirely eliminated, offering the greatest assistance when working with larger tiles. It can be used on both floors and walls.
The leveling system consists of baseplates, wedges, and pliers. Using the baseplate under the tile, the wedges can be used to level the tiles by pressing them from below. Tightening the wedge is done with specially designed pliers.
The baseplates maintain a 2 mm grout width between the tiles. If a larger grout gap is required, tile spacers should also be used. Once the adhesive has fully set, the wedges and visible baseplate parts can be removed. This operation should always be done by striking along the grout lines, either with a rubber mallet or simply by kicking the clips and wedges out. The wedges can be reused many times, with only the baseplates needing to be replaced.
