SOUDAL T-REX Red High Grab Construction Adhesive 380g

Application:

• Provides initial grab strength of 350 kg/m² (when applied over the entire surface) and excellent final bonding strength.
• Holds instantly after compressing the surfaces, requiring no mechanical support, and replaces screws and nails.
• One surface must be porous.
• Suitable for bonding heavy elements, wall coverings, panels, moldings (wood and PVC), insulation, decorative and acoustic boards, cable ducts to fiber-reinforced concrete, concrete, chipboards, and MDF panels.
• Can be used for bonding PU foam or polystyrene elements.
• Ideal for bonding concrete and wooden structures.
• Suitable for window sills and trim bonding.
• Useful for repairing ceramic tiles and bonding natural stones.
• Paintable after curing.
• Solvent-free and odorless.
• Fully cures in 24 hours.

Key Features:

• Solvent-free
• Odorless
• Paintable
• Initial grab strength of 350 kg/m²
• Full curing in 24 hours
• Replaces nails and screws
• Adjustable for a few minutes
• Suitable for uneven surfaces
• For indoor and outdoor use
• Fiber-reinforced
• One surface must be porous

Instructions for Use:
Ensure the surface is clean, dry, and free of dust and grease. Remove any loose parts. Place the cartridge into a caulking gun and apply the adhesive in stripes or dots. For panel bonding, place dots around corners and edges. Immediately align the surfaces and press them firmly together. Bonding strength depends on the applied pressure, not the duration of compression. Perform any adjustments before fixing. Bonded items can be loaded after 24-48 hours. Remove adhesive residues and clean with Soudal Swipex cleaning wipes.