Application:
- Provides initial grab strength of 125 kg/m² (when applied over the entire surface) and excellent final bonding strength.
- To be applied using the contact method; it holds instantly after compressing the surfaces, requiring no mechanical support, replacing screws and nails.
- Adheres to all chemically resistant porous and non-porous materials.
- Ideal for bonding heavy elements, wall coverings, panels, moldings (wood, metal, and PVC), insulation, decorative and acoustic boards, and cable ducts to fiber-reinforced concrete, concrete, chipboards, and MDF panels.
- Suitable for bonding concrete, metal, and wooden structures.
- Can be used for window sills and trim bonding.
- Useful for ceramic tile repairs.
- As a solvent-based adhesive, it may etch sensitive materials.
- Fully cures in 24 hours.
Key Features:
- Solvent-based
- Contact adhesive
- Initial grab strength of 125 kg/m²
- Full curing in 24 hours
- Replaces nails and screws
- Compensates for surface unevenness
- Suitable for indoor and outdoor use
- Fiber-reinforced
- Compatible with porous and non-porous surfaces
- Suitable for uneven surfaces
- Moisture-resistant after curing
Instructions for Use:
Ensure the base surface is clean, dry, and free of dust and grease. Remove any loose parts. Place the cartridge into a caulking gun and apply the adhesive in stripes or dots. For panel bonding, apply adhesive in dots around corners and edges. Immediately align the surfaces and press them firmly together. Bonding strength depends on the applied pressure, not the duration of compression. Perform any adjustments before fixing. For heavier elements, press the surfaces together, separate them, wait for at least 5 minutes, then press again. Bonded items can be loaded after 24-48 hours. Remove any adhesive residues and clean with Soudal Swipex cleaning wipes.
